62
3
Daily Care
3.3
Cleaning the Copier
Following describes how to clean the copier.
This section is divided into separate descriptions that individually deal with how to clean
external covers, internal components, document cover/DADF, and document glass.
3.3.1 Cleaning External Covers
Following describes how to clean external covers.
●
Before you start to clean the machine, be sure to switch off and unplug the machine. Access to a live
machine’s interior for cleaning can cause electric shock.
●
Do not use benzene, paint thinner or other volatile liquids or insect repellant sprays as they might
discolor, deform or crack covers.
●
Cleaning the machine with an excessive amount of water may cause the machine to malfunction or
damage documents when they are being copied or printed.
Procedure
1
Wipe external covers with a firmly
wrung soft cloth moistened with water.
If it is difficult to remove dirt from external covers,
moisten a soft cloth with a small amount of neutral deter-
gent, and gently wipe the covers.
Never use cleaning agents other than water or neutral
detergent.
2
Wipe off any excess water from external covers with a soft cloth.
To Next Page
Loading...
Need help?
General
