EasyManuals Logo
Home>Fuji Xerox>Copier>DocumentCentre C400 Series

Fuji Xerox DocumentCentre C400 Series User Manual

Fuji Xerox DocumentCentre C400 Series
483 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #353 background imageLoading...
Page #353 background image
327
3
User Friendly Features
Basic Copying Added Features Image Quality Others
3.7
Outputting to the Finisher
Tray - Output/Stapling
Copies can be output collated to the Finisher Tray (offset output) or each set of copies can
be output in page order and stapled. The number of copies in each job that can be stapled is
2 to 50 (plain paper). Bond paper, plain paper, recycled paper, and custom paper 1 to 5 can
be stapled.
Stapling is possible for paper loaded in trays 1 to 4. For details on paper sizes that can be output to the Finisher
Tray, see “ Sizes and Loading Capacity of Paper That Can Be Output to the Finisher Tray” below.
To use the stapling feature, the Light Finisher (option) and 128 MB Memory kit must be installed.
This feature cannot be combined with Tray 5 (Bypass Tray), Blank Separators under Transparency Separators,
Mixed Size Originals, Uncollated, Image Repeat, Poster, and Booklet features.
When the replace staple cartridge message is displayed, copying will not be started even if you press the Start
button. Load new staples. For details about replacing staples, see “3.2.6 Replacing the Staple Cartridge” (P. 58)
in “Part 1 Hardware”.
When there is only one sheet to output, the staple setting is automatically canceled.
If you select Tray 5 (Bypass Tray) after selecting Finisher Tray as the output tray or after setting stapling, the out-
put tray is automatically changed to the Center Output Tray.
Sizes and Loading Capacity of Paper That Can Be Output to the
Finisher Tray
Paper Size
The following shows the paper sizes that can be output to the Finisher Tray:
A4 , A4, B5 , B4, A3, 16K , 8K, 8 × 10", 8.5 × 11", 8.5 × 11" , 8.5 × 13",
8.5 × 14", 11 × 17"
Loading Capacity
The following shows the loading capacity of the Finisher Tray:
Up to 1,000 sheets of A4 or 8.5 × 11" or smaller paper can be output.
Up to 500 sheets of B4 or larger paper can be output.
Up to 300 sheets of paper of differing size (larger size paper stacked on top
of small size paper) can be output.
A
B
Report
Document Stapled
A
B
Report

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocumentCentre C400 Series and is the answer not in the manual?

Fuji Xerox DocumentCentre C400 Series Specifications

General IconGeneral
BrandFuji Xerox
ModelDocumentCentre C400 Series
CategoryCopier
LanguageEnglish

Related product manuals