Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external d evices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
To ensure that your device works properly, o nly use the connection cable
supplied or o nly use a high-quality connection cable.
Ports on t he device
PortsExternaldevicesDevice
The ports are located on the front and rear side of the device. The ports available on
your device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the ma inboard.
Headphones, black (front of
device)
Headphones
Microphone port, black (front of device)
Microphonepo rt
Audio output (Line Out), light
green
AudiooutputLineout
Audio input (Line In), light blue
AudioinputLinein
Serial port, turquoise
Serialport
DVI-I mon itor port, white
Monitorport
USB - U niversal Serial Bus:
• blue: USB 3.0, front of
device
• black: USB 2.0, rear of
device
UniversalSerialBus
RJ45-LAN port
LANport
PS/2 mouse port, gre en
MouseportPS / 2mouseport
PS/2 keyboard port, purple
Keyboardport
DP DisplayPort
DisplayPort
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
Fujitsu 21
To Next Page
Loading...
Need help?
General
Weight and Dimensions
