System expansions
Installing and removing the SmartCard reader (only
FUJITSU Thin Client FUTRO S92
0/S930)
If you are also installing the optional loudspeaker, install the SmartCard
reader before the loudspeaker.
Installing the SmartCard reader
SmartCardread er
If not already installed, you can fit a SmartCard reader.
► Open the casing (see "
Opening the casing", Page 34).
► If a PCIe board is installed, you must remove the cross p iece and PCIe
board (see "
Removing the board", Page 60).
1
► Careful
ly remove the cover of the SmartCard read er bay from the casing cover (1).
36 Fujitsu