First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied s oftware is
installed and configured. Because this procedure m ust not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using th e mains adapter.
During the installation process, DO NOT restart the d evice unless
you are requested to do so!
To make it easier to use yo
ur device for the first time, the operating system is pre-installed on the drive.
1
2
► Press the ON/OFF button (1) for about one second to switch the device on.
The power-on indicator (2) lights up as long as the system is switched on.
► During installation, follow th e instructions on screen.
If a W indows operating system is installed on your device, you will find more information
on the system and drivers, help programmes, updates, manuals etc. on the device. This
information can also be found on the Internet at "
http://www.fujitsu.com/fts/ suppor t/".
You can find information and help on the Windows operating system functions
on the Internet at "
http://windows .microsoft.com" .
20 Fujitsu
To Next Page
Loading...
Need help?
General