Connecting e xtern a l devices
Connecting external devices
Under all circumstances, please obse rve the safety notes provided in the
"
Important notes", Page 13 chapter before connecting or disconnecting
any devices to or from your Tablet PC .
Always read the documentation supp lied with the device you wish to conn ect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about wh ether or not devices need to be switched off, please refer
to the docum entation supplied with the external device.
Some of the external devices re quire special drivers (see the operating
system and external device documentation).
Connecting an external monitor
HDMI port
HDMIport
The HDMI port of your device can be used to connect an external amplifier, LCD
TV or a plasma TV with an HD MI connection.
► Connect the data cable to the
external device.
► Connect the data cable to the HDMI port.
Some LCD televisions have only two loudspeaker ports and therefore
cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you
must change the HDMI sound settings accordingly.
You can find the settings under Control Panel - Hardware and Sound. Deactivate the
settings for DTS Audio and Dolby Digital to enable playback of HDMI sound.
Fujitsu 71
To Next Page
Loading...
Need help?
General