Accessories for your Tablet PC (opti
onal)
Place the Tablet PC on the tablet stand
1
2
2
► Fold the suppo
rting surface of the tablet stand upwards (1) until the
desired set-u
p angle is reached.
► Place the Tablet PC so tha t it rests against the front of the tablet stand
supporting surface whe n coming from above.
► Slide the Tab
let PC ont o the tablet stand in the direction of the arrow (2) until the
Tablet PC en
gages in the guide pins of the tablet stand.
The Tablet
PC is not mechanically locked to the tablet stand.
If you chan
ge the set-up angle o f the tablet stand, there is a risk that the
Tablet PC
will lose its ability to remain in the tablet stand. Therefore, hold
the Table
tPCfirmly when you alter the set-up angle .
Remove Tablet PC from the tablet stand
► To remove the Tab let PC from the tablet stand, lift the Tablet PC upwards
away from the guide pins of the tablet stand.
Fujitsu 45
To Next Page
Loading...
Need help?
General