Furuno NAVNET 1824C User Manual

8. MAINTENANCE, TROUBLESHOOTING
8-7
8.8 Diagnostics
This paragraph provides the procedures for testing the equipment for proper operation.
Four tests are provided: Memory I/O test, Keyboard test, and Test pattern.
8.8.1 Memory I/O test
The memory I/O test provides for individual testing of the display unit, FURUNO BB GPS
Receiver, Network Sounder ETR-6/10N, ETR-30N, and ARP, displaying program number
and checking for proper operation.
1. Press the MENU key to show the menu.
2. Press the SYSTEM CONFIGURATION soft key.
3. Press the SYSTEM SETUP soft key.
4. Press the TEST & CLEAR soft key.
5. Press the MEMORY I/O TEST soft key.
MEMORY
I/O TST
RETURN
* = Requires a FURUNO BB GPS Receiver.
** = Requires Network Sounder ETR-6/10N or ETR-30N.
*** = Requires ARP-equipped Model
18x4/19x4 series network radar.
DISPLAY UNIT TEST
GPS SENSOR TEST*
NETWORK SOUNDER TEST**
ARP TEST***
MEMORY I/O TEST menu
6. Then, press appropriate soft key to start a diagnostic test.

Furuno NAVNET 1824C Specifications

General

Brand	Furuno
Model	NAVNET 1824C
Category	Marine Radar
Language	English