Recording an ECG or Rhythm
Item Name Description
3 Gain, Filter, and
Speed
To edit the gain, filter, or speed of the waveform in the report, do the
steps as follow:
• Click the ellipsis icon that is on the lower right of the FD Report
tab.
• Select a new value from the expanded list.
• The Full Disclosure report refreshes with the selected gain, filter,
and speed.
4 Done icon Closes the Full Disclosure report. For more information, see Close a
Patient Report on page 67.
5 Delete icon Deletes the Full Disclosure report. For more information, see Delete
a Patient Report on page 66.
6 Edit icon Edits the patient information for the Full Disclosure report. For more
information, see Edit Patient Information in a Patient Report on page
65.
7 Copy icon Prints a copy of the Full Disclosure report. For more information, see
Print a Patient Report on page 63.
8 Transmit icon Transmits the Full Disclosure report. For more information, see
Transmit a Patient Report to a Configured Destination on page 60.
9 Full Disclosure tab Click the Full Disclosure tab to navigate to the Full Disclosure
waveform and application.
To start a new Full Disclosure report for the same patient, click the Full Disclosure
tab to navigate to the Full Disclosure waveform and application, and restart the Full
Disclosure ECG. For more information, see Record a Full Disclosure ECG on page 68.
2088531-370-2 MAC VU360
™
Resting ECG Analysis System 71
To Next Page
Loading...
Need help?
General
