gefran 650 L User Manual

80224_MHW_650 L - 1250 L_07-2018_ENG - 58
4.10.1. dIG - Defining type of digital inputs
Acronym Scrolling message Submenu Attributes
dIG DIGITAL INPUT TYPE MODE R W
The parameter shows and sets the type of digital inputs.
Unit of measurement: -
Options: NPN = NPN digital inputs or dry contact
PNP = PNP digital inputs
4.10.2. ALRM.N - Number of alarms enabled
Acronym Scrolling message Submenu Attributes
ALRM.N NUM OF ENABLE ALARMS MODE R W
The parameter shows and sets the number of alarms enabled.
Unit of measurement: Number
Options: 1...4
4.10.3. TY.TM - Base time settings for ALARM1 alarm condition persistence
Acronym Scrolling message Submenu Attributes
tY.tM BASE TIME DEFINITION OF ALARM1 TIMER MODE R W
The parameter displays and sets the base times used for ALARM1 alarm condition persistence.
Unit of measurement: -
Options: MM.SS = Base time is calculated and displayed in minutes.seconds
HH.MM = Base time is calculated and displayed in hours.minutes
4. CONFIGURATION

gefran 650 L Specifications

General

Brand	gefran
Model	650 L
Category	Measuring Instruments
Language	English