80224_MHW_650 L - 1250 L_07-2018_ENG - 70
4. CONFIGURATION
4.15. PASC0 – Setting level 0 password
Acronym Scrolling message Submenu Attributes
PASC0 SET PASS0 Level 2 R W
The parameter is used to set the password to access User Menu parameters.
Default code = 10
Unit of measurement: Number
Options: 0...9999
4.16. PASC1 - Setting level 1 password
Acronym Scrolling message Submenu Attributes
PASC1 SET PASS1 Level 2 R W
The parameter lets you set the password for accessing level 1 configuration submenus.
Default code = 1
Unit of measurement: Number
Options: 0...9999
4.17. PASC2 - Setting level 2 password
Acronym Scrolling message Submenu Attributes
PASC2 SET PASS2 Livello 2 R W
The parameter lets you set the password for accessing level 2 configuration submenus.
Default code = 2
Unit of measurement: Number
Options: 0...9999
4.18. FI.CFG - Entering the reset code
Acronym Scrolling message Submenu Attributes
FI.CFG ENTER DEFAULT CONFIGURATION PASS Livello 2 R W
The parameter lets you set the code for resetting the indicator to factory configuration, which will delete all changes
made.
Default code: 99.
ATTENTION! After you have set code 99, when you press the
key the indicator runs the Power-on procedure, as
described in paragraph “3.2. Power-on sequence” on page 24.”
Unit of measurement: Number
Options: 0...9999
To Next Page
Loading...
Need help?
General
