HIKVISION DS-2TD2637-7/QY User Manual

Note
You can import the exported Device Common Parameters to devices of the same
series.
4)Click Browse to select the saved conguration le.
5)Input the encryption password you have set when exporting the conguration le.
6)Click Import.
10.4 Export Diagnose Information
Diagnose information includes running log, system information, hardware information.
Go to
Conguration > System > Maintenance > Upgrade & Maintenance , and click
Diagnose Information to export diagnose information of the device.
You can check Additional Perimeter Protection Calibration Record to generate the
calibration
le with the diagnosis le. The function varies according to different camera
models.
10.5 Reboot
You can restart the device via browser.
Go to
Conguration > System > Maintenance > Upgrade & Maintenance , and click Reboot.
10.6 Device Auto Maintenance
Set the auto maintenance schedule and the device will automatically restart on schedule,
which helps avoid problems such as network anomaly and outage during continuous
operation, etc.
Steps
1.
Go to
Conguration > System > Maintenance > Upgrade & Maintenance .
2.
Check Enable Auto Maintenance.
3.
Read the prompt information and click OK.
4.
Select the date and time when the device automatically restart.
5.
Click Save.
Note
This function is only available for Administrator.
Thermal & Optical Bi-spectrum Network Camera User Manual
88

HIKVISION DS-2TD2637-7/QY Specifications

General

Brand	HIKVISION
Model	DS-2TD2637-7/QY
Category	Security Camera
Language	English