2)Optional: If your email server requires authentication, check Authentication and input
your user name and password to log in to the server.
3)Set the E-mail Encryption.
●
When you select SSL or TLS, and disable STARTTLS, emails are sent after encrypted
by SSL or TLS. The SMTP port should be set as 465.
●
When you select SSL or TLS and Enable STARTTLS, emails are sent after encrypted
by STARTTLS, and the SMTP port should be set as 25.
Note
If you want to use STARTTLS, make sure that the protocol is supported by your
email server. If you check the Enable STARTTLS while the protocol is not supported
by your email sever, your email is sent with no encryption.
4)Optional: If you want to receive notication with alarm pictures, check Attached
Image. The notication email has 3 attached alarm pictures about the event with
congurable image capturing interval.
5)Congure Alarm E-mail Attachment Settings.
Image
Select the number of captures of the corresponding channel.
●
0: It will not upload the image of the selected channel.
●
1: It will only upload the image captured when the alarm is triggered.
●
3: It will upload the images captured about 1 s before and after the alarm is
triggered, as well as the image captured when the alarm is triggered.
Video
Select the video channel and video duration as required.
●
0 s: It will not upload the video of the selected channel.
●
3 s: Upload the video that is recorded about 1 s before and 2 s after the alarm is
triggered.
●
5 s: Upload the video that is recorded about 2 s before and 3 s after the alarm is
triggered.
●
7 s: Upload the video that is recorded about 2 s before and 5 s after the alarm is
triggered.
6)Input the receiver's information, including the receiver's name and address.
7)Click Test to see if the function is well
congured.
3.
Click Save.
9.2.4 Notify Surveillance Center
Check Notify Surveillance Center, the alarm information is uploaded to the surveillance
center when an alarm event is detected.
Thermal & Optical Bi-spectrum Network Camera User Manual
84