HIKVISION DS-2TD2637-7/QY User Manual

Chapter 9 Arming Schedule and Alarm Linkage
Arming schedule is a customized time period in which the device performs certain tasks.
Alarm linkage is the response to the detected certain incident or target during the
scheduled time.
9.1 Set Arming Schedule
Set the valid time of the device tasks.
Steps
1.
Click Arming Schedule.
2.
Drag the time bar to draw desired valid time.
Note
Up to 8 periods can be congured for one day.
3.
Adjust the time period.
-
Click on the selected time period, and enter the desired value. Click Save.
-
Click on the selected time period. Drag the both ends to adjust the time period.
-
Click on the selected time period, and drag it on the time bar.
4.
Optional: Click Copy to... to copy the same settings to other days.
5.
Click Save.
9.2 Linkage Method Settings
You can enable the linkage functions when an event or alarm occurs.
9.2.1 Trigger Alarm Output
If the device has been connected to an alarm output device, and the alarm output No. has
been congured, the device sends alarm information to the connected alarm output device
when an alarm is triggered.
Steps
1.
Go to
Conguration > Event > Basic Event > Alarm Output .
2.
Set alarm output parameters.
Automatic Alarm
For the information about the conguration, see Automatic Alarm .
Manual Alarm For the information about the conguration, see Manual Alarm .
3.
Click Save.
Thermal & Optical Bi-spectrum Network Camera User Manual
81

HIKVISION DS-2TD2637-7/QY Specifications

General

Brand	HIKVISION
Model	DS-2TD2637-7/QY
Category	Security Camera
Language	English