HIKVISION DS-2TD2637-7/QY User Manual

5.
Check Display Shield Area to show the shield area on the live view.
6.
Click Add to save the
re detection shield, and it will be listed in the list. You can select a
region and click Delete to delete it from the list. You can also enable the region or not.
7.
Click Save.
7.3 Perimeter Protection
The function is used to detect whether there is any target breaking the perimeter
protection rules. The device will track the target and alarm when the perimeter protection
rule is triggered.
7.3.1 Set Perimeter Protection Rules
The device can detect whether there is any target breaking the perimeter protection rules.
The device will alarm when the rule is triggered.
Before You Start
Go to Conguration > System > Maintenance > VCA Resource Type , select Temperature
Measurement + Perimeter Protection.
Steps
1.
Go to
Conguration > Perimeter Protection > Rule .
2.
Check Intelligent Analysis.
3.
Optional: Check Enable Fusion to view optical and thermal image.
4.
Set perimeter protection rules.
1)Click
to add a new rule.
2)Enter the rule name, and click the drop down menu to select Rule Type.
Line Crossing
If any target moves across the setting line, the alarm will be triggered. You can set
the crossing direction.
Intrusion
If any target intrudes into the
pre-dened region longer than the set duration, the
alarm will be triggered.
Region Entrance
If any target enters the
pre-dened region, the alarm will be triggered.
Region Exiting
If any target exits the pre-dened region, the alarm will be triggered.
3)Draw the detection rule.
Line Crossing
Thermal & Optical Bi-spectrum Network Camera User Manual
66

HIKVISION DS-2TD2637-7/QY Specifications

General

Brand	HIKVISION
Model	DS-2TD2637-7/QY
Category	Security Camera
Language	English