Note
●
The lower the sensitivity is, the more signicant the change should be to trigger the
detection.
●
The sound intensity threshold refers to the sound intensity reference for the
detection. It is recommended to set as the average sound intensity in the
environment. The louder the environment sound, the higher the value should be.
You can adjust it according to the real environment.
Sudden Decrease of Sound Intensity Detection
Detect sudden decrease of sound intensity. Sensitivity is congurable.
3.
Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method
Settings
for setting linkage methods.
4.
Click Save.
Note
The function varies according to different models.
8.6 Detect Scene Change
Scene change detection function detects the change of the scene. Some certain actions
can be taken when the alarm is triggered.
Steps
1.
Go to
Conguration > Event > Smart Event > Scene Change Detection .
2.
Click Enable.
3.
Set the Sensitivity. The higher the value is, the more easily the change of scene can be
detected. But the detection accuracy is reduced.
4.
Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method
Settings
for setting linkage method.
5.
Click Save.
Note
The function varies according to different models.
Thermal & Optical Bi-spectrum Network Camera User Manual
80
To Next Page
Loading...
Need help?
General
