Reinstalling from an ISO image
Procedure
1. Download the ISO image file for the latest Intelligent Provisioning recovery media by clicking
Download from the Intelligent Provisioning website
(https://support.hitachivantara.com/en/user/answers/downloads.html#hardware-
download).
NOTE: The following servers and Intelligent Provisioning versions are supported:
• HA800 supports Intelligent Provisioning 3.x.
2. To download the ISO image file, complete the onscreen instructions.
3. Mount the ISO file in one of the following ways:
• Using iLO virtual media.
• Burn the Intelligent Provisioning recovery media ISO file to a DVD and place it in the CD/DVD drive
of the server.
4. To power up the server Press ON.
5. To display the boot menu, press F11 during server POST.
6. Press 1 on the keyboard to boot from the CD/DVD.
7. To update or reinstall Intelligent Provisioning, select the interactive method. The server continues
booting from the Intelligent Provisioning recovery media.
8. Select Reinstall Intelligent Provisioning when the window opens.
9. Reboot the server when the installation is complete by pressing F10.
Reinstalling from an RPM package (Linux only)
Procedure
1. Download the RPM package file for the latest Intelligent Provisioning recovery RPM package from
the SDR website
(https://support.hitachivantara.com/en/user/answers/downloads.html#hardware-download
).
2. Execute the command:
rpm -i firmware-intelligentprovisioning-<version>.x86_64.rpm
3. Execute the command:
cd /usr/lib/x86_64-linux-gnu/firmware-intelligentprovisioning-ip-<version>/
4. Execute the command:
#./setup
5. Execute the command:
To Next Page
Loading...
Need help?
General