• Alerts Enabled
• Alert Destination Contacts
• Periodic HSA Trap Config
• Location: Physical location of the server
• Read Communities: You can set up to 3 read-only communities.
• Role: Definition of the server role or function.
• Role Detail: Describes the tasks the server might perform.
• SNMPv3 Engine ID: The unique SNMP ID for this server.
• SNMPv3 Inform Retry Attempt: Number of SNMP retries to perform.
• SMPv3 Inform Retry Interval Seconds
• SNMP Trap Communities: You can provide up to eight trap community strings.
• Trap Source Hostname: The hostname that is used when SNMP traps are generated.
• Users: Create up to eight user profiles for SNMPv3 USM parameters.
• SNMP Cold Start Trap Broadcast
3. Click Save Settings to save the changes.
Network Interfaces
Configuring iLO Manager Dedicated Network Interface
Procedure
1. From the main Intelligent Provisioning screen, click Perform Maintenance > iLO Configuration >
Network Interfaces > Manager Dedicated Network Interface.
2. Configure the following settings:
• Auto Neg: Select this option and the NIC automatically configures speed and duplex.
• FQDN
• Frame Size
• Full Duplex: Enable full duplex on the NIC. Auto Neg overrides this option.
• Host Name: Provide the DNS Host name.
• IPv4 Addresses
• IPv6 Addresses
• IPv6 Static Addresses
• IPv6 Default Gateway
• Link Status (of this port)
• MAC address
To Next Page
Loading...
Need help?
General