• Create arrays
• Create logical drives
• Create logical devices
◦ Logical drives
◦ Physical drives
◦ Storage enclosures
• Change configuration settings
• View system messages
Creating a new array or logical drive
Procedure
1. Click + Create Array.
2. To create a simple array, click Simple Array.
3. Select a Logical Drive Type.
4. Select the Number of Drives.
5. Enter a Logical Drive Name.
6. Select a RAID mode.
7. Select a Minimum Array Size.
8. Review the array settings.
9. Click Submit.
Configuring an array or logical drive
Procedure
1. Make changes to the following options:
NOTE: Changes take place during the next reboot.
• General
◦ Transformation Priority
◦ Rebuild Priority
◦ Surface Scan Analysis Priority
To Next Page
Loading...
Need help?
General