NOTE: Intelligent Provisioning does not support the smart array P824i-p MR controller.
Procedure
1. Select BIOS configuration (RBSU) from the maintenance options. The BIOS configuration (RBSU)
screen displays the following information:
• ROM version
• If a pending update follows valid RBSU dependency rules
• Number of pending changes
• Number of items changes automatically due to dependency rules
• Resetting the BIOS
• Workload profile
2. To reset the BIOS for this server, click Reset BIOS.
3. To update the workload profile, click Workload Profile.
4. To change RBSU configurations, select from the menu on the left, and then select the section that
contains the configuration you want to change.
5. To save changes, click Update.
6. To return to the Perform Maintenance home screen, click the Previous left arrow.
About iLO Configuration
The iLO Configuration screen provides the following options for configuring iLO:
• Summary: Provides a summary of the iLO configuration.
• iLO Self-Test: Displays items tested during the self test.
• Management Settings
◦ Manager
◦ Manager Network services
◦ SNMP Service
• Network Interfaces
◦ Manager Dedicated Network Interface
◦ Manager Shared Network Interface
◦ Manage Virtual Network Interface
• User Accounts
To Next Page
Loading...
Need help?
General