671
uuOil Monitor System
*
uDisplaying the Oil Monitor System Information
Reset the engine oil monitor system information if you have performed the
maintenance service.
1. Turn the ignition switch to ON
(w
*1
.
2. Press the (display/information) button several times until is displayed.
3. Press ENTER button to go to the oil monitor system information screen.
4. Press and hold the ENTER button for about 10 seconds to enter the reset mode.
5. Press / button to select Reset.
(You can also select Cancel to end the process).
6. Press the ENTER button to reset the selected item.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
■
Resetting the Display
Failure to reset the engine oil life after a maintenance
service results in the system showing incorrect
maintenance intervals, which can lead to serious
mechanical problems.
You can reset also the oil monitor system information
display using the audio/information screen.
2 Customized Features P. 413
The dealer will reset the engine oil life display after
completing the required maintenance service. If
someone other than a dealer performs maintenance
service, reset the engine oil life display yourself.
Models with Display Audio
ENTER Button
(Display/Information) Button
/ Button
19 CR-V PET JSS (KE KG)-32TLA6000.book 671 ページ ２０１８年７月２３日 月曜日 午後６時８分
To Next Page
Loading...
Need help?
General
