20 PC42E-T Desktop Printer User Guide
Print a Test Label When You Turn on the Printer
You can print a test label when you first turn on the printer.
1. Make sure that the printer has media and ribbon (if necessary) installed.
2. Connect the printer to power and turn on the printer.
3. Press and hold the Print button until the printer calibrates the media, prints a
configuration label, and then lets you select the printer command language.
Print a Test Label When the Printer is Ready to Print
You can print a test label when the printer is sitting idle and ready to print.
1. Make sure that the printer has media and ribbon (if necessary) installed.
2. Press and hold the Print button until the printer advances media to the
beginning of the next label. The printer will then print out a Configuration label.
To Next Page
Loading...
Need help?
General
