28 PC42E-T Desktop Printer User Guide
Upgrade Firmware from the Printer Web Page
You can upgrade the printer firmware from the printer web page. To configure the
printer from the web page, the printer must be turned on and connected to your
Wi-Fi or Ethernet network. To access the web page, see Configure the Printer from
the Printer Web Page on page 26.
1. Download the printer firmware from the Honeywell website. See Download the
Printer Firmware Update on page 27.
2. Click the Services > Firmware Upgrade.
The Firmware Upgrade screen is displayed showing the current firmware
version.
3. Click Browse to locate the upgrade file, select the file, and then click Open.
4. Click Upgrade.
The printer web page shows that it is upgrading the firmware on your printer.
Upgrade Firmware from PrintSet 5
You can upgrade the printer firmware from the PrintSet 5 Firmware Update Wizard.
1. Download the printer firmware from the Honeywell website. See Download the
Printer Firmware Update on page 27.
2. From the main menu, click Printer > Firmware Update Wizard.
3. Follow the steps of the wizard to complete the upgrade.
Upgrade Firmware from a USB Storage Device
Use a USB storage device to upgrade the printer firmware.
1. Make sure the USB storage device has a single partition and is formatted as
FAT16 or FAT32.
2. Download the printer firmware from the Honeywell website. See Download the
Printer Firmware Update on page 27.
3. Copy the firmware upgrade file (typically a .bin format) to the root of a USB
storage device.
4. Turn off the printer.
5. Insert the USB storage device into one of the USB host ports.
6. Turn on the printer.
As the firmware upgrade file is loaded into the printer, the status LED blinks
orange. This process may take several minutes.
When the printer status LED turns solid green, the printer is ready to use.
To Next Page
Loading...
Need help?
General
