26 PC42E-T Desktop Printer User Guide
You can also connect a peripheral device through the USB-to-Serial cable.
Connect a USB Device
You can use the USB host interface port on the printer to connect keyboards,
barcode scanners, or a USB storage device.
1. If you are connecting a USB storage device, make sure the device has a single
partition and is formatted as FAT16 or FAT32.
2. Connect the device to the USB host port.
Configure the Printer
You can configure your printer:
•from the printer web page.
• with PrintSet 5.
You can download Honeywell applications to extend the capabilities of the printer.
You may need to purchase a license to run some applications. To learn more about
licenses and other Honeywell software solutions, go to sps.honeywell.com >
Software > Productivity.
Support for Honeywell Safety and Productivity Solutions products is available
online through the Technical Support Portal.
Configure the Printer from the Printer Web Page
You can configure most network settings from the printer web page.
1. Start a web browser on your PC.
2. In the address field, type the IP address of your printer and press Enter. The
printer web page appears.
Note: If you do not know the IP address of your printer, you can print a configuration label.
For more information, see About Test Labels on page 19.
3. Click Login.
4. Type your Username and Password in the entry fields, and then click Login.
The default username is itadmin, and the default password is pass.
5. Click Configure. The Configuration Summary page appears.
6. To see a list of printer settings, click Configuration Summary.
To configure printer settings, use the links in the navigation pane:
• For serial, Ethernet, Bluetooth or Wireless 802.11 settings, click
Communications.
To Next Page
Loading...
Need help?
General
