EasyManuals Logo
Home>Honeywell>Barcode Reader>Solaris 7980g

Honeywell Solaris 7980g User Manual

Honeywell Solaris 7980g
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
Solaris 7980g User Guide 97
Code 39 Append
This function allows the scanner to append the data from several Code 39 bar
codes together before transmitting them to the host computer. When the scanner
encounters a Code 39 bar code with the append trigger character(s), it buffers
Code 39 bar codes until it reads a Code 39 bar code that does not have the append
trigger. The data is then transmitted in the order in which the bar codes were read
(FIFO). Default = Off.
Code 39 Redundancy
If you are encountering errors when reading Code 39 bar codes, you may want to
adjust the redundancy count. Redundancy adjusts the number of times a bar code
is decoded before transmission, which may reduce the number of errors. Note that
the higher the redundancy count, the longer it will take to decode the bar code. To
adjust the redundancy, scan the Code 39 Redundancy bar code below, then scan a
redundancy count between 0 and 10 on the Programming Chart. Scan Save.
Default = 0.
Code 32 Pharmaceutical (PARAF)
Code 32 Pharmaceutical is a form of the Code 39 symbology used by Italian phar-
macies. This symbology is also known as PARAF.
Note: Trioptic Code (page 131) must be turned off while scanning Code 32 Pharmaceutical
codes.
On
* Off
Code 39 Redundancy
On
* Off

Table of Contents

Other manuals for Honeywell Solaris 7980g

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Solaris 7980g and is the answer not in the manual?

Honeywell Solaris 7980g Specifications

General IconGeneral
Input voltage100 - 240 V
Input frequency50 - 60 Hz
Power consumption400 mA
Power source typeAC
AC adapter output voltage5 - 5.2 V
USB version2.0
Standard interfacesKeyboard wedge, RS-232, USB
USB 2.0 ports quantity1
Connectivity technologyWired
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
CertificationCE, RoHS
Product colorBlack
LED indicatorsStatus
Housing material-
Programming functionYes
International Protection (IP) codeIPX5
Sustainability certificatesRoHS
TypeFixed bar code reader
Scanner type1D/2D
Maximum scan area0 x 190 mm
Yaw reading angle-75 - 75 °
Pitch reading angle-65 - 65 °
Light levels (direct sunlight)0 - 100000 lx
Linear (1D) barcodes supportedCodabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, Intelligent Mail, JAN, MSI, PLANET, POSTNET, Plessey, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supportedAztec Code, Codablock, Code 49, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth85 mm
Width152 mm
Height148 mm
Weight539 g

Related product manuals