Honeywell Solaris 7980g User Manual

CHAPTER
7
Solaris 7980g User Guide 151
EAS SETTINGS
EAS Considerations
Do not install any large iron fixtures, such as steel support poles, near the Solaris
7980g. Doing so may re-shape the EAS tag deactivation field.
Note: The 7980GEL does not support the EAS interface.
EAS Deactivation
The Solaris 7980g supports deactivation of Checkpoint and Sensormatic/Tyco
EAS tags. The following illustration shows the location of the EAS deactivation
area. It is important to pass the entire tag through this area to deactivate the secu-
rity tag.
Note: Do not store tags within 18.0 in (45.7cm) of the Solaris 7980g. Tags stored closer
than 18.0 in (45.7cm) may be unintentionally deactivated. This area also includes
storage areas located under the Solaris 7980g.

Honeywell Solaris 7980g Specifications

General

Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power consumption	400 mA
Power source type	AC
AC adapter output voltage	5 - 5.2 V
USB version	2.0
Standard interfaces	Keyboard wedge, RS-232, USB
USB 2.0 ports quantity	1
Connectivity technology	Wired
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Certification	CE, RoHS
Product color	Black
LED indicators	Status
Housing material	-
Programming function	Yes
International Protection (IP) code	IPX5
Sustainability certificates	RoHS
Type	Fixed bar code reader
Scanner type	1D/2D
Maximum scan area	0 x 190 mm
Yaw reading angle	-75 - 75 °
Pitch reading angle	-65 - 65 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, Intelligent Mail, JAN, MSI, PLANET, POSTNET, Plessey, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Codablock, Code 49, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	85 mm
Width	152 mm
Height	148 mm
Weight	539 g