Solaris 7980g User Guide 49
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the
Programming Chart, then scanning Save.
Illumination Lights
If you want the illumination lights on while reading a bar code, scan the Lights On
bar code, below. However, if you want to turn just the lights off, scan the Lights Off
bar code. Default = Lights On.
Centering
Use Centering to narrow the scanner’s field of view to make sure that when the
scanner is hand-held, it reads only those bar codes intended by the user. For
instance, if multiple codes are placed closely together, centering will insure that
only the desired codes are read. (Centering can be used in conjunction with
Centering, page 49, for the most error-free operation in applications where multi-
ple codes are spaced closely together.)
Note: To adjust centering when the scanner is in Presentation Mode, see Presentation
Centering (page 3-45).
User-Specified Reread Delay
To Next Page
Loading...
Need help?
General
Weight and Dimensions
