Solaris 7980g User Guide 11
Beeper Frequency Adjustment
When Frequency Adjustment is set to On, holding the Sound button down for up to
3 seconds scrolls through the frequency (tone) settings for the scanner’s beeper.
When set to Off, the Sound button does not scroll through these settings. Default =
Frequency Adjustment On.
Reading Techniques
Present the bar code to the scanner. The LEDs turn up to read the code. If the light
level in the room is not high enough, the code may not be read.
Menu Bar Code Security Settings
Honeywell scanners are programmed by scanning menu bar codes or by sending
serial commands to the scanner. If you want to restrict the ability to scan menu
codes, you can use the Menu Bar Code Security settings. Please contact the near-
est technical support office (see Technical Assistance on page xi) for further infor-
mation.
Set Custom Defaults
You have the ability to create a set of menu commands as your own, custom
defaults. To do so, scan the Set Custom Defaults bar code below before scanning
the menu commands for your custom defaults. If a menu command requires scan-
ning numeric codes from the Programming Chart, then a Save code, that entire
* Frequency Adjustment On
To Next Page
Loading...
Need help?
General
Weight and Dimensions
