Honeywell Solaris 7980g User Manual

Solaris 7980g User Guide 187
Resetting the Custom Defaults
If you want the custom default settings restored to your scanner, scan the Activate
Custom Defaults bar code below. This resets the scanner to the custom default
settings. If there are no custom defaults, it will reset the scanner to the factory
default settings. Any settings that have not been specified through the custom
defaults will be defaulted to the factory default settings.
The charts on the following pages list the factory default settings for each of the
commands (indicated by an asterisk (*) on the programming pages).
Menu Commands
Activate Custom Defaults
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page
Product Default Settings
Beeper Volume Adjustment Volume Adjustment Off BTNVOL0 10
*Volume Adjustment On BTNVOL1 10
Beeper Frequency Adjustment Frequency Adjustment Off BTNTON0 11
*Frequency Adjustment On BTNTON1 11
Setting Custom Defaults Set Custom Defaults MNUCDP 12
Save Custom Defaults MNUCDS 12
Resetting the Custom Defaults Activate Custom Defaults DEFALT 12
Program the Interface
Plug and Play Codes Keyboard Wedge:
IBM PC AT and Compatibles with CR suffix
PAP_AT 13
Laptop Direct Connect with CR suffix PAPLTD 14
RS232 Serial Port PAP232 14
Plug and Play Codes:
RS485
IBM Port 5B Interface PAPP5B 14
IBM Port 9B HHBCR-1 Interface PAP9B1 14
IBM Port 17 Interface PAPP17 14
IBM Port 9B HHBCR-2 Interface PAP9B2 15
RS485 Packet Mode On RTLPDF1 15
RS485 Packet Mode Off RTLPDF0 15
RS485 Packet Length (20-256) RTLMPS 16

Honeywell Solaris 7980g Specifications

General

Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power consumption	400 mA
Power source type	AC
AC adapter output voltage	5 - 5.2 V
USB version	2.0
Standard interfaces	Keyboard wedge, RS-232, USB
USB 2.0 ports quantity	1
Connectivity technology	Wired
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Certification	CE, RoHS
Product color	Black
LED indicators	Status
Housing material	-
Programming function	Yes
International Protection (IP) code	IPX5
Sustainability certificates	RoHS
Type	Fixed bar code reader
Scanner type	1D/2D
Maximum scan area	0 x 190 mm
Yaw reading angle	-75 - 75 °
Pitch reading angle	-65 - 65 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, Intelligent Mail, JAN, MSI, PLANET, POSTNET, Plessey, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Codablock, Code 49, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	85 mm
Width	152 mm
Height	148 mm
Weight	539 g