Honeywell Solaris 7980g User Manual

42 Solaris 7980g User Guide
command. After scanning the Read Time-Out bar code, set the time-out duration
(from 0-300,000 milliseconds) by scanning digits on the Programming Chart, then
scanning Save. Default = 30,000 ms.
Presentation Mode
Presentation Mode uses ambient light and scanner illumination to detect bar
codes. When in Presentation Mode, the LEDs remain dim until a bar code is pre-
sented to the scanner, then the LEDs turn up to read the code. Scan the following
bar code to program your device for Presentation Mode. Default = Presentation
Mode.
Presentation Idle Mode
When Presentation Idle Mode is selected, the scanner goes into idle mode (illumi-
nation dims) after the time interval set, during which there is no activity. Change
the Presentation Idle mode by scanning the bar code below, and then scanning
digits from the Programming Chart, then scanning Save. The range is 0 to
3000000. The scanner will wake when an object is presented to the window or the
pitch or volume button is pressed. Default = 10000 (10s).
When Off is selected, no power saving is used and the scanner remains powered
on.
Note: In some conditions the scanner will switch between Presentation Idle Mode and
Presentation Sleep Mode according to ambient light level. This allows the scanner to
wake up in very dark conditions.
Note: This selection is unavailable when the Illumination Lights or LED Illumination -
Presentation Mode are set to off.
Read Time-Out
* Presentation Mode
Presentation Idle Mode
Off

Honeywell Solaris 7980g Specifications

General

Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power consumption	400 mA
Power source type	AC
AC adapter output voltage	5 - 5.2 V
USB version	2.0
Standard interfaces	Keyboard wedge, RS-232, USB
USB 2.0 ports quantity	1
Connectivity technology	Wired
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Certification	CE, RoHS
Product color	Black
LED indicators	Status
Housing material	-
Programming function	Yes
International Protection (IP) code	IPX5
Sustainability certificates	RoHS
Type	Fixed bar code reader
Scanner type	1D/2D
Maximum scan area	0 x 190 mm
Yaw reading angle	-75 - 75 °
Pitch reading angle	-65 - 65 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, Intelligent Mail, JAN, MSI, PLANET, POSTNET, Plessey, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Codablock, Code 49, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	85 mm
Width	152 mm
Height	148 mm
Weight	539 g