HP E3456A User Manual

19
Chapter 1: Installing the Emulation Probe
Powering-On and Powering-Off the Emulation Probe
Powering-On and Powering-Off the Emulation
Probe
It’s important to follow the proper power-on or power-off sequences so
that your target system, the emulation probe, and other equipment are
not damaged.
To power on the system
With all components connected, power-on your system as follows:
1 Power-on the logic analyzer, if you are using one.
2 Power-on the emulation probe.
3 Power-on your target system.
To power off the system
Power off your system as follows:
1 Power-off your target system.
2 Power-off the emulation probe.
3 Power-off the logic analyzer, if you are using one.
To connect the emulation probe to a power
source
The emulation probe does not have an On/Off switch. To power on the
emulation probe:
1 Connect the power cord to the power supply and to a socket

HP E3456A Specifications

General

Brand	HP
Model	E3456A
Category	Control Unit
Language	English