EasyManuals Logo
Home>HP>Tablet>Elite x2 G8

HP Elite x2 G8 User Manual

HP Elite x2 G8
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #165 background imageLoading...
Page #165 background image
2. Enter HP PC Hardware Diagnostics Windows in the Microsoft Store search box.
3. Follow the on-screen directions.
The tool downloads to the selected location.
Downloading HP Hardware Diagnostics Windows by product name or number (select products only)
You can download HP PC Hardware Diagnostics Windows by product name or number.
NOTE: For some products, you might have to download the software to a USB ash drive by using the
product name or number.
1. Go to http://www.hp.com/support.
2. Select Software and Drivers, select your type of product, and then enter the product name or number in
the search box that is displayed.
3. In the Diagnostics section, select Download, and then follow the on-screen instructions to select the
specic Windows diagnostics version to be downloaded to your computer or USB ash drive.
The tool downloads to the selected location.
Installing HP PC Hardware Diagnostics Windows
To install HP PC Hardware Diagnostics Windows, navigate to the folder on your computer or the USB
ash
drive where the .exe le downloaded, double-click the .exe le, and then follow the on-screen instructions.
Using HP PC Hardware Diagnostics UEFI
HP PC Hardware Diagnostics UEFI (Unied Extensible Firmware Interface) allows you to run diagnostic tests
to determine whether the computer hardware is functioning properly. The tool runs outside the operating
system so that it can isolate hardware failures from issues that are caused by the operating system or other
software components.
NOTE: For Windows 10 S computers, you must use a Windows computer and a USB ash drive to download
and create the HP UEFI support environment because only .exe les are provided. For more information, see
Downloading HP PC Hardware Diagnostics UEFI to a USB ash drive on page 156.
If your PC does not start in Windows, you can use HP PC Hardware Diagnostics UEFI to diagnose hardware
issues.
Using an HP PC Hardware Diagnostics UEFI hardware failure ID code
When HP PC Hardware Diagnostics UEFI detects a failure that requires hardware replacement, a 24-digit
failure ID code is generated.
For assistance in solving the problem:
Select Contact HP, accept the HP privacy disclaimer, and then use a mobile device to scan the failure ID
code that appears on the next screen. The HP Customer Support - Service Center page appears with your
failure ID and product number automatically lled in. Follow the on-screen instructions.
– or –
Contact support, and provide the failure ID code.
Downloading HP Hardware Diagnostics Windows by product name or number (select products only)
155

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Elite x2 G8 and is the answer not in the manual?

HP Elite x2 G8 Specifications

General IconGeneral
Form factorConvertible (Detachable)
Product typeHybrid (2-in-1)
Product colorSilver
Country of originChina
Market positioningPremium
Original brand nameHP
HD type3K2K
Color gamut72 %
Display surfaceGloss
RGB color spaceNTSC
Display diagonal13 \
Anti-glare screenAlways gives an optimal view, even in direct sunlight.
Display brightness450 cd/m²
Display resolution3000 x 2000 pixels
Display diagonal (metric)33 cm
Numeric keypadNo
Pointing deviceClickpad
Internal memory16 GB
Memory clock speed4266 MHz
Memory form factorOn-board
Internal memory typeLPDDR4x-SDRAM
HP segmentBusiness
HP speaker typeHP Dual Speakers
SSD capacityThe Solid State Drive's storage capacity in Gigabytes.
SSD interfaceNVMe, PCI Express
Storage mediaSSD
SSD memory typeTLC
Total storage capacity512 GB
Number of SSDs installed1
Repairability index8.4
Battery weight190 g
Battery capacity47 Wh
Number of battery cells2
Discrete graphics card modelNot available
On-board graphics card modelIntel Iris Xe Graphics
Front camera HD typeFull HD
Antenna type2x2
Wi-Fi standardsWi-Fi 6 (802.11ax)
Bluetooth version5.0
WLAN controller modelIntel Wi-Fi 6 AX201
WLAN controller manufacturerIntel
Charging port typeUSB Type-C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity0
Processor cache8 MB
Processor cores4
Processor familyIntel® Core™ i5
Processor threads8
Configurable TDP-up28 W
Processor frequency- GHz
Processor cache typeL3
Configurable TDP-down12 W
Processor boost frequency4.4 GHz
Configurable TDP-up frequency2.6 GHz
Configurable TDP-down frequency1.1 GHz
AC adapter power65 W
Operating system installedWindows 11 Pro
Package depth483 mm
Package width69 mm
Package height305 mm
Weight and Dimensions IconWeight and Dimensions
Depth221.9 mm
Height14.2 mm
Weight1170 g
Depth (tablet mode)215.8 mm
Width (tablet mode)289.3 mm
Height (tablet mode)8.8 mm
Weight (tablet mode)820 g

Related product manuals