Introduction
About this guide
1-2
About this guide
This guide provides the following information for MSM Access Points (APs):
Hardware overview
Safety and regulatory information
Installation procedure
For those using an AP in autonomous mode, an initial configuration procedure is also
provided. This procedure is unnecessary for those using an AP in its factory-default
controlled mode.
For APs used in autonomous mode, see the MSM3xx / MSM4xx Access Points
Management and Configuration Guide.
For APs used in controlled mode, see Working with controlled APs in the MSM7xx
Controllers Management and Configuration Guide.
These guides are available as described in Online documentation on page 1-5 at end of this
chapter.
Products covered
This guide provides autonomous-mode information for the following MSM3xx and MSM4xx
Access Points (“WW” identifies worldwide versions for the rest of the world):
Information for the above three APs is primarily provided in the E-MSM430, E-MSM460, and
E-MSM466 802.11n Access Points Quickstart. See also Regulatory information on page 9-1
for information applicable to these APs.
Model WW Americas Japan Israel
E-MSM430 J9651A J9650A J9652A J9653A
E-MSM460 J9591A J9590A J9589A J9618A
E-MSM466 J9622A J9621A J9620A
Model WW USA Japan
MSM410 (E-MSM410) J9427A/B J9426A/B J9529A/B
MSM422 (E-MSM422) J9359A/B J9358A/B J9530A/B
MSM310 (E-MSM310) J9379A/B J9374A/B J9524A/B
MSM310-R (E-MSM310-R) J9383A/B J9380A/B
MSM320 (E-MSM320) J9364A/B J9360A/B J9527A/B
MSM320-R (E-MSM320-R) J9368A/B J9365A/B J9528A/B
To Next Page
Loading...
Need help?
General
