Figure 7-6 Locking the front bezel
----End
7.5 Removing a Hard Disk
Remove a hard disk before replacing it with a new one.
You do not need to power off the RH2288 V3 before removing a hard disk. If services are
running on the RH2288 V3, you have backed up the data stored on the hard disk to be
removed.
Before removing a hard disk, determine its location to prevent misoperations. Otherwise, the
RAID array will fail.
NOTE
If a hard disk is frequently removed and installed in an interval shorter than 30 seconds, there are risks
that the hard disk cannot be identified.
Table 7-1 shows the mapping between the silkscreens of the hard disks and slot IDs in the
System Event Log.
Table 7-1 Mapping
Hard Disk Position
Panel Silkscreen Slot ID
Front hard disks 0 to 7 (8 x 2.5-inch hard
disks)
disk0 to disk7
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 135
To Next Page
Loading...
Need help?
General