Figure 7-116 Removing the disk backplane
Step 14 Place the removed disk backplane in an ESD bag.
----End
7.52 Installing the Front Disk Backplane
Install a disk backplane to replace the faulty one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the front disk backplane to be replaced. For details, see 7.51 Removing the Front
Disk Backplane.
Step 3 Take the spare front disk backplane out of its ESD bag.
Step 4 Align the notches on the disk backplane with the hooks (marked with red boxes in Figure
7-117), move the disk backplane horizontally to the head of the chassis as far as it will go, and
move it downwards until the latches are locked. See Figure 7-117.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 235
To Next Page
Loading...
Need help?
General