Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the standard RAID controller card to be replaced. For details, see 7.31 Removing the
PCIe Plug-in RAID Controller Card.
Step 3 Take the spare standard RAID controller card out of its ESD bag.
Step 4 Install the standard RAID controller card.
l For details about how to install the standard RAID controller card on the mainboard, see
7.22.2 Installing a PCIe Card on the Mainboard.
l For details about how to install the standard RAID controller card on the riser card, see
7.22.1 Installing a PCIe Card on the Riser Card.
Step 5 Check the chip model of the RAID controller card to be installed.
If the chip model of the RAID controller card to be installed is LSI SAS3108, install the TFM
first. For details, see 7.36 Installing the Supercapacitor (PCIe Plug-in RAID Controller
Card).
If the chip model of the RAID controller card to be installed is PM8060, connect the cable
between the supercapacitor and the RAID controller card. For details, see 7.36 Installing the
Supercapacitor (PCIe Plug-in RAID Controller Card).
Step 6 Connect the SAS cables to the standard RAID controller card.
Step 7 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 8 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 9 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 10 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
Step 11 Log in to the RAID configuration screen to check whether RAID configuration needs to be
imported or activated. For details, see the Huawei V2&V3 Server RAID Controller Card
User Guide.
----End
7.33 Removing the Supercapacitor (Screw-in RAID
Controller Card)
A supercapacitor is configured to provide power-off protection for an LSI SAS2208 or LSI
SAS3108 screw-in RAID controller card.
Remove the supercapacitor if it has failed or cannot provide sufficient power.
Before removing a supercapacitor, power off the server and observe electrical safety
precautions.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 184
To Next Page
Loading...
Need help?
General