Step 12 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
Step 13 Log in to the RAID configuration screen to check whether RAID configuration needs to be
imported or activated. For details, see the Huawei V2&V3 Server RAID Controller Card
User Guide.
----End
7.31 Removing the PCIe Plug-in RAID Controller Card
Remove a PCIe plug-in RAID controller card before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the riser card if the RAID controller card to be removed is installed on a riser card.
For details, see 7.19 Removing the Riser Card.
Step 8 Check the chip model of the RAID controller card to be removed.
If the chip model of the RAID controller card to be removed is LSI SAS3108, remove the
trans flash module (TFM) first. For details, see 7.34 Removing the Supercapacitor (PCIe
Plug-in RAID Controller Card).
If the chip model of the RAID controller card to be removed is PM8060, remove the cable
between the supercapacitor and the RAID controller card. For details, see 7.34 Removing the
Supercapacitor (PCIe Plug-in RAID Controller Card).
Step 9 Remove the SAS cables from the standard RAID controller card.
Step 10 Remove the standard RAID controller card.
l For details about how to remove a standard RAID controller card from the mainboard,
see 7.21.2 Removing a PCIe Card from the Mainboard.
l For details about how to remove a standard RAID controller card from a riser card, see
7.21.1 Removing a PCIe Card from a Riser Card.
Step 11 Place the removed standard RAID controller card in an ESD bag.
----End
7.32 Installing the PCIe Plug-in RAID Controller Card
Install a PCIe plug-in RAID controller card to replace the original one.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 183
To Next Page
Loading...
Need help?
General