Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the internal USB flash drive from the connector on the mainboard. See Figure 7-54.
Figure 7-54 Removing the internal USB flash drive
Step 8 Place the removed USB flash drive in an ESD bag.
----End
7.26 Installing the Internal USB Flash Drive
Install a USB flash drive to replace the original one.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 176
To Next Page
Loading...
Need help?
General