Figure 7-136 Installing the PSU backplane
Step 5 Connect cables to the PSU backplane. For details, see 2.7 Internal Cabling.
Step 6 Install PSUs. For details, see 7.10 Installing a PSU.
Step 7 Install the air duct. For details, see 7.14 Installing the Air Duct.
Step 8 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 9 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 10 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
----End
7.59 Removing the Left Mounting Ear
Remove the left mounting ear if it has failed.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.
Step 3 Power off the RH2288 V3. For details, see 4.2 Powering Off the Server.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 252
To Next Page
Loading...
Need help?
General