Sensor Description Remarks
CPUN VDDQ Temp CPU VDDQ temperature CPU1: Components in
positions U1000 and U59 on
the mainboard.
CPU 2: Components in
positions U62 and U65 on the
mainboard.
N indicates the CPU ID. The
value is 1 or 2.
CPUN VRD Temp CPU VRD temperature CPU1: Component in position
U52 on the mainboard.
CPU 2: Component in position
U53 on the mainboard.
N indicates the CPU ID. The
value is 1 or 2.
CPUN MEM Temp CPU DIMM temperature CPU. N indicates the DIMM
ID. The value is 1 or 2.
SYS 3.3V Mainboard 3.3 V voltage Component in position U21 on
the mainboard. N indicates the
value of 1 or 2.
SYS 5V Mainboard 5.0 V voltage
SYS 12V Mainboard 12.0 V voltage
CPUN VCore 1.8 V CPU voltage
CPUN DDR VDDQ 1.2 V DIMM voltage
CPUN DDR VDDQ2
RearDiskN Temp Built-in disk backplane
temperature
Rear hard disk backplane. N
indicates the rear hard disk
backplane number. The value
is 1 or 2.
RAID Temp RAID controller card
temperature
RAID controller card
FANN F Speed or
FANN R Speed.
Fan speed Fan module. N indicates the
fan module ID. The value
ranges from 1 to 4.
Power Server input power Total PSU power.
PowerN PSU1 input power PSU. N indicates the PSU ID.
The value is 1 or 2.
CPU Usage CPU usage threshold N/A
Memory Usage DIMM usage threshold N/A
CPUN Status CPU status check CPU. N indicates the CPU ID.
The value is 1 or 2.
RH2288 V3 Server
User Guide
11 Appendix
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 300
To Next Page
Loading...
Need help?
General