EasyManuals Logo

Husqvarna FE 350 EU User Manual

Husqvarna FE 350 EU
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
13 BRAKE SYSTEM 65
13.1 Checking free travel of hand brake lever
Warning
Danger of accidentsBrake system failure.
If there is no free travel on the hand brake lever, pressure builds up on the front brake circuit. The front brake can fail due to
overheating. Adjust the free travel on hand brake lever according to specifications.
B01636-10
(FE 350 EU, FE 350 AUS)
Push the hand brake to the handlebar and check free travel
A
.
Free travel of hand brake lever 3 mm ( 0.12 in)
» If the free travel does not meet specifications:
Adjust the free travel of the hand brake lever. ( p. 65)
B01637-10
(FE 350 USA)
Push the hand brake lever forwards and check free travel
A
.
Free travel of hand brake lever 3 mm ( 0.12 in)
» If the free travel does not meet specifications:
Adjust the basic position of the hand brake lever. ( p. 65)
13.2 Adjusting free travel of hand brake lever (FE 350 EU, FE 350 AUS)
B01638-10
Check the free travel of the hand brake lever. ( p. 65)
Adjust the free travel of the hand brake lever with adjusting screw
1
.
Info
Turn the adjusting screw clockwise to reduce free travel. The pressure point
moves away from the handlebar.
Turn the adjusting screw counterclockwise to increase free travel. The pres-
sure point moves towards the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
13.3 Adjusting the basic position of the hand brake lever (FE 350 USA)
B01638-10
Check the free travel of the hand brake lever. ( p. 65)
Adjust the basic setting of the hand brake lever to your hand size by turning adjusting
screw
1
.
Info
Turn the adjusting screw clockwise to increase the distance between the
hand brake lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between
the hand brake lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna FE 350 EU and is the answer not in the manual?

Husqvarna FE 350 EU Specifications

General IconGeneral
BrandHusqvarna
ModelFE 350 EU
CategoryMotorcycle
LanguageEnglish

Related product manuals