9 SERVICE SCHEDULE
36
Every 40 operating hours
Every 20 operating hours
Every 10 operating hours
After 5 operating hours
After 1 operating hour
Check that the throttle cables are undamaged, routed without kinks, and set correctly. ○ ● ● ●
Clean the air filter and air filter box. ( p. 64) ● ● ●
Change the glass fiber yarn filling of the main silencer. ( p. 66) ● ●
Service the fork. ●
Perform the shock absorber service. ●
Check the tightness of the easily accessible, safety-relevant screws and nuts. ○ ○ ● ● ●
Change the fuel screen. ( p. 115) ○ ● ● ●
Check the fuel pressure. ● ● ●
Check the idle speed. ● ● ●
Final check: Check the vehicle for operating safety and take a test ride. ○ ○ ● ● ●
Read out the fault memory after the test ride using the Husqvarna Motorcycles diag-
nostics tool.
○ ○ ● ● ●
Make a service entry in Husqvarna Motorcycles Dealer.net. ○ ○ ● ● ●
○ One-time interval
● Periodic interval
9.3 Recommended work
every 48 months
every 12 months
Every 80 operating hours
Every 40 operating hours
After 20 operating hours / Every 20 operating hours
After 10 operating hours / Every 10 operating hours
Change the front brake fluid. ● ●
Change the rear brake fluid. ● ●
Change the hydraulic clutch fluid. ( p. 79) ● ●
Lubricate the steering head bearing. ( p. 57) ● ●
Clean the pressure sensor hose. ● ● ● ●
Service the fork. ○
Perform the shock absorber service. ○
Check the electric starter drive. ● ●
Change the fuel filter. ●
Check the reed valve housing, reed valve and intake flange. ● ● ●
Change the oil pump; clean the oil screen. ●
Clean the oil screen in the oil tank. ●
Clean the protection cap of the pressure sensor. ● ● ● ●
Change the coolant. ( p. 108) ●
Perform minor engine service. (Check the exhaust control for functioning and
smooth operation. Check the clutch.)
● ● ● ●
To Next Page
Loading...
Need help?
General
