Hypertherm HyPrecision 50S User Manual

HyPrecision 50S/60S/75S Operator Manual 808690 165
7 – Troubleshooting
Troubleshooting
Short seal life
If the high-pressure water seals have a short life, take these actions.
 Make sure that the mating surfaces are smooth and free of debris.
 Repair or replace the high-pressure cylinder and plunger.
 Make sure that the water quality is within satisfactory ranges. Refer to the Water quality section, which
begins on page 188.
 Examine the ends of the high-pressure cylinder for cracks.
 Replace the high-pressure water seals and hoops.
 Check the air pressure in the water accumulator tank. Refer to page 89 for instructions.
 Replace the high-pressure cylinder.
If the high-pressure seal backups have a short life, make sure that the plunger bearing is not worn.

Hypertherm HyPrecision 50S Specifications

General

Brand	Hypertherm
Model	HyPrecision 50S
Category	Water Pump
Language	English