@
IBM SurePath Setup Utility
--------------------------
Main Menu
------------------------
Select a Menu:
System Information
Video Information
Disk Drives
Input/Output Ports
Rapid Resume
Plug and Play
Startup Options
Model Information
Date and Time
Advanced Options
Figure 1-1. Setup Utility Screen
Making Changes with the Setup Utility
You can change only some of the information that appears on the Setup
Utility screen. The information you can change is always enclosed in
brackets like this: [Disabled]. The entries on the screen that you cannot
change provide useful information about the computer and its hardware. For
example, if the mouse is not working or installed incorrectly, the entry will
show if it is disabled or not installed.
Here are the options available on the Setup Utility screens:
System Information:
This screen provides a summary of the computer
features. (This is an
information only
screen and cannot be changed.)
Video Information:
This screen provides information about the installed
video controller (for System Board Type A-2) and video memory. For
System Board Type A-1, you can set the video memory for 1 MB or 2 MB.
For more information on monitors, monitor frequencies, and refresh rates,
see “Hardware Interfaces” on page 1-12.
1-18
To Next Page
Loading...
Need help?
General