Set Port 0 {or 1} Name menu
Table 96 on page 131 shows the Set Port 0 Name and the Set Port 1 Name menu items. This menu
allows the drive to set the Port 0 Name and the drive Port 1 Name.
Table 96: Set Port 0 {or 1} Name menu
Function Next menu
Cancel “Fibre Options menu (CE Offline Mode)” on page 129
5 -
0 -
0 -
5 -
… -
Save and Continue “CE Save Data menu (Root, Port, and Node names)” on page 132
Note: If you alter any name, you must save or alter all the names. For example, if you alter the Port Name
only, you must at least save Port 0 and Port 1.
Cancel
Causes the “Fibre Options menu (CE Offline Mode)” on page 129
to display.
0123456789ABCDEF
Selecting this option increments the hexadecimal character. The number wraps from ‘F’ to ‘0’.
Save and Continue
Causes “CE Save Data menu (Root, Port, and Node names)” on page 132 menu to display to allow or
disallow saving data in DRAM.
Set Node 0 {or 1} Name menu
Table 97 on page 131 shows the Set Node 0 Name and the Set Node 1 Name menu items. This menu
allows the drive to set Node 0 Name and the Node 1 Name.
Table 97:
Set Node 0 {or 1} Name menu
Function Next menu
Cancel “Fibre Options menu (CE Offline Mode)” on page 129
5 -
0 -
0 -
5 -
… -
Save and Continue “CE Save Data menu (Root, Port, and Node names)” on page 132
Note: If you alter any name, you must save or alter all the names. For example, if you alter the Node
Name only, you must at least save Node 0 and Node 1.
Cancel
Causes the “Fibre Options menu (CE Offline Mode)” on page 129 to display.
Virtual Operator panel
131
To Next Page
Loading...
Need help?
General