Table 138: Installation Instruction feature codes and RPQs (continued)
Description Machine type Model Feature code
Attached to Windows
System
3592 EH7, EH8, 55F, 60F 9212
Attached to Other Non-
IBM
3592 EH7, EH8, 55F, 60F 9213
Attached to Linux
System
3592 EH7, EH8, 55F, 60F 9215
Attached to i5/OS or
OS/400 System
3592 EH7, EH8, 55F, 60F 9400
Attached to AIX System 3592 EH7, EH8, 55F, 60F 9600
Tools
One set of tools is often shipped with a frame or rack shelf feature code. The tools can be contained in a
ship group. See Chapter 9, “Parts catalog information,” on page 259 for part numbers. See “Special tools
and customer supplies” on page 35 for information.
• CE scratch tape - It is not to be given to the customer for their use. This item, which is occasionally
referred to as a diagnostic cartridge, is also available as a FRU. The EH7 and later drives use a JK type
cartridge as a CE scratch tape.
• Cleaning cartridge - Use to clean the tape path. See “Cleaning cartridge” on page 36.
• Microcode CD - Contains the EC level of the microcode that is shipped with the drive canister. The part
number changes with each EC release of the microcode.
• Fibre wrap tools - Use to test the connection at the drive and the end of the bre cable. See “Fibre wrap
tool” on page 38.
• Ethernet patch cable for laptop - Used for all service functions in this conguration.
Installing the Rack Mount Kit
Follow the steps to complete the installation of the Rack Mount Kit. Refer to Figure 55 on page 170.
Installation
169
To Next Page
Loading...
Need help?
General