Notes:
• The 3592 drive canisters are hot-pluggable. To minimize the impact on the customer's operation, one of
the drive canisters can be unplugged and removed while power is still supplied to the remaining drive in
the enclosure.
• Avoid touching the bezel while this procedure is completed. Contaminants from your ngers can affect
performance of the library accessor.
• Before you order a drive FRU, determine the model number from the label on the failing drive and not
from the service panel.
Removing the drive canister from an enclosure
1. Disconnect the canister cable ( 1 in Figure 81 on page 253) from the rear of the drive.
Figure 81: Drive canister connectors
2. Remove the bre cable connectors ( 2 ) from the back of the drive that is to be removed.
3. See Figure 82 on page 254, which shows the removal of the canister from the front side of the rack.
Use your other hand to support the drive canister from underneath the metal case. Release the spring
plunger ( 3 in Figure 82 on page 254) and remove the drive from the enclosure.
Locations, checks, adjustments, removals, and replacements
253
To Next Page
Loading...
Need help?
General