• Any code load operation (library or drive) initiated from a library user interface and
not associated with a FRU replacement
• Any prepare or finish service procedure initiated from a library user interface
including set storage slot offline or online
• Any drive serial number change not associated with a FRU replacement
• Any drive power cycle initiated from a library user interface
• Any node card reset initiated from a library user interface
Notes:
• Each login and logout is only logged if security is enabled.
• Door open is logged whether or not SNMP Audit Logging is enabled.
The following information is provided in the logs for each of the events listed above:
• Machine type, model, and serial number of the reporting machine
• The UserID initiating the event
• Level of severity
• Trap ID
• Description of the event
Note: The UserID is only applicable for the Web when security is enabled and for operations
performed from the operator panel.
Parent topic: SNMP messaging
SMI-S support
This section describes the Storage Management Initiative - Specification (SMI-S) service
provided by the TS3500 Tape Library.
SMI-S defines a standard interface for interoperable, extensible, and secure management of
heterogeneous and distributed storage systems. This interface uses an object-oriented,
XML-based, messaging-based protocol designed to support the specific requirements of
managing devices such as the TS3500 Tape Library in a storage environment. The SMI-S
specification describes the information available to a WBEM client, such as the IBM® Tivoli®
Storage Productivity Center (TPC), from an SMI-S-compliant CIM WBEM Server such as the
To Next Page
Loading...
Need help?
General