Icom IC-7610 Advanced Manual

7
2. ADVANCED OPERATIONS
Band Edge Beep (continued)
Entering a new Band Edge
After you edit (or delete) the preset band edges, you
can enter a new band edge.
1. Open the “User Band Edge” screen.
2. Select a blank band. (Example: 9)
3. Enter the lower and upper band edge frequency.
(Example: 51.150.000 – 51.750.000 MHz)
L See Editing a Band Edge on page 5
for details on
entering the band edge frequencies.
4. Touch [ENT] to save the entered band edge
frequencies.
• The entered band edge is saved and returns to the
previous screen.
Deleting a Band Edge
You can delete band edges doing the following steps.
1. On the FUNCTION set screen, select “User Band
Edge.”
2. Touch the band edge you want to delete for 1
second.
(Example: 1: 1.800.000 – 1.999.999 MHz)
3. Touch “ Delete.”
• The selected band edge is deleted and returns to the
previous screen.
1.800.000 – 1.999.999 MHz is deleted.

Icom IC-7610 Specifications

General

Brand	Icom
Model	IC-7610
Category	Transceiver
Language	English