75
9. CLOCK AND TIMERS (ADVANCED)
Setting the Timers (Continued)
D Daily Timer setting items
Timer Status (Default: OFF)
Select ON to start the Daily Timer, and select OFF to
stop the timer.
Reservation Timer (Default: 0:00)
Set the time to automatically turn ON the transceiver
power.
L To clear the setting, push
and touch
“Clear.”
Power OFF Timer (Default: --:--)
Set the time to automatically turn OFF the transceiver
power.
L
time, and then push
to select “Clear.”
NOTE: When Power OFF Timer is set to an
earlier time than the Reservation Timer time, the
transceiver will not be turned OFF automatically.
To automatically turn the transceiver ON and
OFF, set Power OFF Timer to a later time than the
Reservation Timer time.
Example:
• Reservation Timer: 8:00
• Power OFF Timer: 9:30
Reservation Channel (MAIN) (Default: -- ch)
Reservation Channel (SUB) (Default: -- ch)
The Memory channel set in this item is automatically
selected when the transceiver is automatically turned
ON by the Reservation Timer, or the set time has
come while the transceiver is turned ON.
LYou cannot select a blank channel.
L To clear the setting, push
and touch
“Clear.”
Day of the Week (Default: --)
Select a day of the week to set the Daily Timer
function.
L To not to select a day, leave the item set to default,
or reset to the default by pushing
and then
touch “Clear.”
Repeat Setting (Default: OFF)
Set the Repeat Setting to ON or OFF.
When this item is set to ON, the timer is activated
every selected day of the week, or everyday if the
Day of the Week item is not set.
L To clear the setting, push
and touch
“Clear.”
<<Set>>
Touch to save all the timer settings for the selected
timer.
NOTE: All of the following settings are not saved
until you touch “<<Set>>.”
To Next Page
Loading...
Need help?
General
